Earrings in your choice of style (studs, hoops, earrings for 7mm cabochons)
 Ethnic pendants
 7mm cabochons 
 4mm cabochons
 Pendant settings for 4mm cabochons
 Glue
 3mm rings
 Round natural stone pendants
 Chain
 0.4mm brass wire

For the oval earrings:

Start by gluing the 4mm cabochons into the settings. 

Then attach the pendants to the oval earrings with 3mm rings.

For the Ethnic earrings:

Start by gluing the 7mm cabochons into the earring settings. 

Then open the ring located under the earring loops to attach the pendants.

For the hoop earrings:

Simply open the hoop and string the natural stone pendant.

For the dangling chain earrings:

Start by cutting 2 pieces of chain about 3cm long. Widen the links with a reamer to facilitate assembly.

Then connect the chains to the ball stud loops by opening the ring located under the earring loop.

Then cut a brass wire and pass it through the last link of the chain, keeping a piece of wire about 5cm long.

Make a small loop then wrap the thread at the bottom of the loop for 2 turns. Cut the excess thread.

With the remaining thread, string the pendant then wrap the thread around 2 turns below the loop. The thread will cover the first one used to connect the chain.

Cut the excess thread flush.

And there you go! Beautiful creation!