beads in 24K fine gold plated metal
4mm faceted beads in natural stones
Linhasita 0.5mm thread
a stopper bead plated in 24K fine gold

This jewelry is very simple to make, for this cut 2 Linhasita threads about 25cm each.

Start threading the beads. You'll see it's quite simple, we thread beads on the 2 threads separately, then assemble them with a bead threaded on both threads at the same time...

Here is the order of threading to create this pretty cluster.

Thread the 2 threads into a faceted bead, then on the right thread thread a faceted bead and on the left one 2 faceted beads, join the threads by threading an oval bead.

Thread an oval bead on the right thread and 2 faceted beads on the left thread, join the threads by threading an oval bead.

On the right thread, thread a faceted bead, 2 natural beads and a faceted bead.

On the left thread, thread a faceted bead, a natural bead and a faceted bead.

Join the threads with an oval bead.

Now thread an oval bead on the right thread and 2 faceted beads on the left thread, join the threads by threading an oval bead.

To finish, thread a faceted bead On the right thread and 2 faceted beads on the left thread, join the threads by threading a faceted bead.

Tie a knot with the 2 threads at the ends of the beads to lock them.

Now place the stopper bead. To do this, thread 2 threads on one side of the bead. 

To place the other 2 crossing, use a very fine thread folded in half that will act as a large needle. Place it in the stopper bead, thread the 2 remaining threads through the loop then pull so they pass without problem.

At the ends of the threads, string a bead then tie a knot with the 2 threads. Cut off the excess.

And there you go! Beautiful work!