|
Be inspired by our brand new creation! A beautiful mix of warm and cool tones with the subtle combination of Carnelian and Blue Lace Agate. We played with different sizes of beads and cabochons to create a beautiful gradient to wear at the hollow of the neck. A subtle and so refined creation to customize with the stones of your choice.
|
||||
|---|---|---|---|---|
| For this creation you will need: | ||||
|
|
||||
| Assembly guide: | ||||
|
This jewelry is very easy to make. To start, glue the cabochons into the settings by placing a small drop of glue in the center. Here we used a 6mm cabochon for the center and 4 cabochons 4mm to place on each side. Be careful not to apply too much glue, as it may overflow onto the edge of the setting. Mount the cushion beads on the pins, 2 cushions 4mm and 2 cushions 6mm, form pretty loops using round-nose pliers. Now connect the different elements together: Cut the chain to the desired length. Here, for a nice drape over the collarbones, we used a chain about 42cm long. Fold the chain in half to visualize the center position, then mount the 6mm cabochon with a 3mm ring at the center of the chain. Then on each side, connect the 6mm cushion beads with the previously created loops. Space the cabochon from the beads by 3 links; you will mount the bead on the 4th link after the cabochon. Keep the same spacing between the different elements, then mount the 4mm cabochons with 3mm rings, the 4mm cushion beads, then the 4mm cabochons. To finish, cut a piece of extension chain about 4cm long. Attach the lobster clasp and the extension chain to the ends of the chain with 3mm rings. And there you go! Beautiful creation! |
||||
 |
||||
To be reserved alone or with friends!
Inspirations, tutorials, and new arrivals: receive the best of handmade in your inbox.
Cabochon settings 4mm and 6mm
4mm cabochons
