24K gold-finished chevron chain
of the 24K gold-finished ball link chain
an eye connector pendant
3mm jump rings 24K gold-finished
a clasp 24K gold-finished
a 24K gold-finished extension chain or a clasp attachment
 jewelry making pliers

This jewelry is very easy to make.

To start, measure your wrist circumference, take the tightest measurement; the clasp and extension chain will add ease.

Separate 2 pieces of chevron chains to keep 7 chevrons per chain. To separate, take 2 flat pliers and, as with a ring, open the spiral chevron. This allows freeing the next chevron.

Connect the chevron chains on each side of the eye connector pendant with 3mm jump rings.

Now measure the length of the previous assembly and subtract this measurement from your wrist circumference. Divide the result by 2, this gives you the length of the other 2 chains to cut. 

Connect the chains at the ends of the chevron chains with 3mm rings. If needed, use a reamer to widen the links of the fine chain to facilitate the passage of the rings.

To finish, place the clasp and the extension chain at the ends of the chain.

And there you go! Beautiful creation!