Crystal Collar

The power of the stones is offered to you with this superb necklace with a bohemian chic look! Moonstone and crystal quartz are combined here with 24K gold...
For this creation you need:
50cm of mini diamond chain 3cm of extension chain 1 lobster clasp 10mm 1 ring 4mm and 2 oval rings 4mm 1 strand of natural stones 2mm cube beads 1 horn pendant 1 quartz crystal bead 1 m of 0.4mm soft brass wire 0.35mm silk thread crimp beads

The power of the stones is offered to you with this superb necklace with a bohemian chic look!

Moonstone and crystal quartz are combined here with 24K gold...

For this creation you need:

50cm of mini diamond chain
3cm of extension chain
1 lobster clasp 10mm
1 ring 4mm and 2 oval rings 4mm
1 strand of natural stones 2mm
cube beads
1 horn pendant
1 quartz crystal bead
1 m of 0.4mm soft brass wire
0.35mm silk thread
crimp beads

Assembly guide:

Here we have made a necklace 55 cm long, but you can perfectly adapt this necklace to the length of your choice. To do this, you will need to either lengthen the bead stringing or the chain.

First, we will prepare the 2 chains located at the top of the necklace. To start, cut 2 pieces of small diamond link chain, each 20 cm long.

Open the oval rings and then place the extension chain on one of the chains, and the clasp on the other chain. Close the rings properly.

Stringing the beads:

Start by connecting the silk thread to one of the chains. String a crimp bead onto the thread, then pass the needle through the last link of the chain before going back through the crimp bead. Make a double knot at the edge of the crimp bead and then bring the crimp bead to the knot. Flatten the crimp bead.

String the gold beads and moonstone beads onto the silk thread to form a stringing of about 15 cm. Place the gold beads randomly for a more bohemian effect.

To finish the stringing, place a crimp bead on the thread, pass through the link of the chain, and then back through the crimp bead. Pull on the thread while keeping it flexible. Your stringing should remain fluid and you should not create tension between the beads.

Make the double knot and then bring the crimp bead to the knot before crimping it. Cut the excess thread flush.

Open a 4 mm ring to connect the horn pendant and then close the ring on the beaded chain at the desired location.

Making the Quartz crystal pendant:

Thread the brass wire through the bead and then wrap it around the bead for 3/4 turns.

Pass one end of the thread through the "thread turns", and do the same with the other end of the thread.

Bring the threads up to the top of the bead. On one of the threads, make a loop and then connect the loop to the bead stringing. Then wrap the thread around the edge of the loop, around itself for one turn.

Then bring the other thread to the edge of the loop and make 3/4 turns. Cut the excess thread flush.

And there you go! Beautiful creation!