A chain dotted with gold confetti, and a single small natural stone resting in the hollow of the neck. The Kamila choker is all about delicacy: it is worn close to the skin, catches the light with every movement and comes together in a few simple gestures, without a single knot.
For a first piece of jewellery that is sure to succeed, or a handmade gesture to slip under the tree. Wear it alone, or with a longer chain for a layered look.
Tools needed: bead reamer, flat-nose pliers (pink flat-nose pliers), cutting pliers, jewellery glue
Need glue? UHU Max Repair glue fixes the stone to the chain for the long term.
Add UHU Max Repair glue (8 g) — 5.90 €Cut a piece of chain about 38 to 40 cm long. This necklace is worn close to the neck. Measure it on yourself: the stone should fall right into the hollow between your collarbones.
With the bead reamer, widen the last link at each end of the chain. That way the 3 mm jump ring can slip in without forcing.
On one side, attach the spring ring clasp with a 3 mm jump ring. On the other, attach the clasp tag with a second 3 mm jump ring. Open and close each jump ring with a twisting motion, using the flat-nose pliers.
Place the cabochon face down on the work surface. On the back, apply a tiny bit of glue and remove any excess if needed. Then gently place the central medallion of the chain on the cabochon. Wait until it is completely dry before handling the chain. And there you have it, your choker is ready.
Place the chain on the back of the cabochon, not the other way round. Set on top of the chain, the cabochon could slide and shift before it is perfectly fixed.
The pack contains two cabochons: make a second choker to give, and wear them as a duo. You can also choose the birthstone of the person you are giving it to, for a gift that truly reflects her.
Malachite — protection and renewal
To be reserved alone or with friends!
Inspirations, tutorials, and new arrivals: receive the best of handmade in your inbox.
