This creation is very easy to make, to do this start by cutting the chain to the desired length. Here we took a small diamond chain of 18cm length and one of 22cm. It will sit close to the neck on the collarbones. The pendants will then fall just in the hollow of the neck.

Now mount the cloud bead on an eye pin and form a nice loop. This pin will allow you to connect the 2 pieces of chains. Open the loops of the cloud pin then connect the chains.

Close the loops properly.

Then cut 5 pieces of the other thinner chain. 

Here I give you the length of the small chains starting from the cloud bead.

Cut one chain of 2cm, one of 1cm, one of 2.5cm, one of 3.5cm, and one of 1.5cm.

Attach these small chains to the longest diamond chain with 3mm jump rings. Play with the spacing, don't try to be regular! This will give more life to your creation.

At the ends of the chains, attach the set pendants with 3mm jump rings.

To finish, connect the clasp and the extension chain to the ends of the chain with 3mm jump rings.

Your jewelry is finished!

Beautiful creation!