Earrings in the shape of your choice (studs, hoops, earrings for 7mm cabochons)
 Ethnic pendants
 7mm cabochons 
 4mm cabochons
 4mm cabochon pendant supports
 Glue
 3mm rings
 Round natural stone pendants
 Chain
 Brass wire 0.4mm

For the oval earrings:

Start by gluing the 4mm cabochons into the supports. 

Then connect the pendants to the oval earrings with 3mm rings.

For the ethnic earrings:

Start by gluing the 7mm cabochons into the earring supports. 

Then open the ring located under the earrings to connect the pendants.

For the hoop earrings:

Simply open the hoop and thread the natural stone pendant.

For the dangling chain earrings:

Start by cutting 2 pieces of chain about 3cm long. Widen the links with a reamer to facilitate assembly.

Then connect the chains to the ball head pins by opening the ring located under the earring loop.

Then cut a piece of brass wire and pass it through the last link of the chain while keeping a piece of wire about 5cm long.

Make a mini loop and then wrap the thread at the bottom of the loop around 2 turns. Cut the excess thread.

With the remaining thread, thread the pendant and then wrap the thread around 2 turns below the loop. The thread will cover the first one used to connect the chain.

Cut the excess thread flush.

And there you go! Beautiful creation!