2 closed rings 25mm
 2 rings 6mm
 Natural 2mm beads
 2 hammered nail earrings
 nylon thread for weaving

 pliers for jewelry making 
 a beading needle

Weaving assembly

 

To start, cut a nylon thread of about 60cm and then thread it through the eye of the needle.

String a bead and then pass the needle under the closed ring.

Pass the needle through the inside of the ring before going back through the bead.

Pull firmly while keeping a starting thread of about 20cm. This will be secured once the weaving is finished.

You will notice that the bead positions itself at the outer edge of the circle.

Continue like this with the other beads until you completely fill the outside of the circle.

Be careful, the mother-of-pearl beads are fragile, remember to use a needle with a very fine eye. If you feel resistance when passing the needle through the bead, do not force it.

To finish, gently press the starting and ending threads and then make a discreet knot on the back. Be careful not to break the beads during the last thread pass. 

Cut the threads flush.

Then open the 6mm rings and connect the weaving to the earrings.

And there you go! Beautiful creation...