Step 1 :

To start, cut 2 pieces of faceted oval chain while keeping 6 oval links. 

Then thread the first link of the chain and the bead onto the eye pin. Before pulling the pin out, position the last link of the chain on the pin. This way, the bead is surrounded on one side by the chain.

Then thread the metal bead onto the pin.

Form a loop with the round-nose pliers.

Step 2 :

Cut 5 pieces of chains of different lengths between 3.5 and 6.5cm.

Be careful not to make the chains too short as it would not give your earring the elongated look.

Open the loop located at the bottom of your bead, on the side of the metal bead, and connect the 5 chains.

Close the loop and do the same for the other BOs, making sure to cut the chains to the same lengths.

Finally, place glue in the BO supports and position the cabochons.

Attach the supports to the top of the bead by directly opening the loop of the pin.