6mm beads
 Natural stone pendants 6mm
 Hoops
 Soft 0.4mm brass wire

To start, cut a brass wire of about 15cm.

Then thread 5 beads 6mm, the pendant, and 5 beads 6mm.

Pass the 2 ends of the thread through the hole of the hoop.

Form the bead loop by pulling firmly on the threads.

Then wrap the threads around 2/3 turns at the edges of the beads.

If needed, use a flat pliers.

To finish, cut the excess thread and make the second loop.

And there you go! Beautiful creation!