4mm and 6mm cabochon holders
 4mm cabochons
 6mm cabochons 
 4mm and 6mm cushion beads
 Flat-headed nails
 3mm rings
 From the mini diamond chain 
 A buoy clasp
 Extension chain
 UHU glue

This jewel is very easy to make. To start, glue the cabochons into the brackets, placing a small dab of glue in the center. Here we've used a 6mm cabochon for the center and 4 4mm cabochons to place on each side.

Be careful not to apply too much glue, as it could spill over the edge of the substrate.

Mount the cushion beads on the studs, 2 cushions 4mm and 2 cushions 6mm, and form pretty curls using round-tipped pliers.

Now connect the various components together:

Cut the chain to the desired length. Here, for a nice fall on the top of the collarbone, we've used a 42cm chain.

Fold the chain in 2 to see where the center is, then mount the 6mm cabochon with a 3mm ring in the center of the chain.

Then connect the 6mm cushion beads on each side to the loops created earlier. Space the cabochon beads 3 links apart, and mount the bead on the 4th link after the cabochon link. 

Maintain the same spacing between the various elements, then assemble the 4mm cabochons with 3mm rings, the 4mm cushion beads and then the 4mm cabochons.

Finally, cut a 4cm piece of extension chain. Connect the ends of the chain, the buoy clasp and the extension chain with 3mm rings.

And there you have it! Beautiful creation!