|
Woven with genuine faceted mother-of-pearl beads, these BOs seduce us with their simplicity and bohemian charm.
|
|---|
| For this creation, you will need: | ||||
|
|
||||
| Tools to Use: | ||||
|
|
||||
| Step 1: | ||||
|
|
Weaving assembly To begin, cut a nylon thread about 60cm long and thread it through the eye of the needle. Thread a bead, then pass the needle under the closed ring. Pass the needle through the inside of the ring before passing back through the bead. Pull firmly, keeping a starting thread of about 20cm. This will be stopped once weaving is complete. You can see that the pearl is positioned at the outer edge of the circle. Continue in this way with the other beads until you have completely filled the outside of the circle. |
|||
| Step 2: | ||||
|
Mother-of-pearl pearls are fragile, so use a needle with a very fine eye. If you feel any resistance when passing the needle through the pearl, don't force it. To finish, gently iron the start and end threads, then tie a discreet knot on the reverse side. Be careful not to break the beads during the last thread pass. Cut wires flush. Then open the 6mm rings and connect the weave to the BOs. And voilà! Beautiful creation... |
||||
Join Perles Corner to discover our new arrivals, exclusive tutorials, and many other surprises... and receive your voucher by email!
2 closed rings 25mm
