58 oval beads in 24K metal
 Creoles
 BO ball studs
 24K fine chain
 4mm cabochons and connector brackets
 Glue
 Square pendants, small shuttles and rhombuses
 Oval rings

To begin, cut all the chains according to the cutting plan below. (see bottom of tutorial)

Tip: To help you cut chains symmetrically, lay the chain flat in front of a ruler. Then locate the link to be removed, at the measurement. Then grab this link with the cutting pliers, lift the chain and, naturally, the chains will fall down, giving you the cutting mark for the 2nd piece of chain. Cut in the right place.

Thread 7 pearls onto the creole, then the 2 pieces of chain (the one hanging on the outside and the one that will make the curve under the creole).

To guide you, take a look at the photo below.

Next, string 15 pearls and the curve chain. Now thread the other dangling chain. 

Place the remaining 7 beads to complete the creole.

Thread the creole rod into its holder, then bend the end upwards with flat-nose pliers to lock the rod in place.

Now place the various decorative elements on the chains with oval rings.

Finally, open the loop under the bo, then slip on the square pendant and creole. Close the ring.

Make the 2nd loop in symmetry...

See below for chain measurements:

There you go! Beautiful creation!