from the chevron chain gilded with 24K fine gold
from the gold ball link chain to 24K fine gold
an eye connector pendant
3mm jump rings gilded with 24K fine gold
a clasp gilded with 24K fine gold
24K fine gold plated extension chain or clasp attachment
pliers for jewelry creations

This jewel is very easy to make.

To start, measure your wrist circumference, take the tightest measurement, the clasp and the extension chain will add the ease value.

Separate 2 pieces of chevron chains to keep 7 chevrons per chain. To separate it, take 2 flat pliers and as for a ring, open the chevron in a spiral. This allows the next chevron to be released.

Connect the chevron chains on each side of the eye connector pendant with 3mm jump rings.

Now measure the length of the previous assembly and subtract this measurement from your wrist circumference. Divide the result by 2, this gives you the length of the other 2 chains to cut.

Connect the chains to the ends of the chevron chains with 3mm rings. If necessary, use a reamer to widen the links of the fine chain and thus facilitate the passage of the rings.

Finally, place the clasp and extension chain at the ends of the chain.

And there you have it! Beautiful creation!