Variations on striped agate

With its soft, spring-like hues, green striped agate has inspired us to create 4 earrings for the arrival of summer. Minimalist or more elaborate, these curls are so easy to achieve!
You will need :
Earrings in a choice of shapes (stud earrings, hoop earrings, earrings for 7mm cabochons) Ethnic pendants 7mm cabochons 4mm cabochons Pendant holders for 4mm cabochons Glue 3mm rings Round pendants in natural stone From the chain 0.4mm brass wire

With its soft, spring-like hues, green striped agate has inspired us to create 4 earrings for the arrival of summer.

Minimalist or more elaborate, these curls are so easy to achieve!

You will need :

Earrings in a choice of shapes (stud earrings, hoop earrings, earrings for 7mm cabochons)
Ethnic pendants
7mm cabochons
4mm cabochons
Pendant holders for 4mm cabochons
Glue
3mm rings
Round pendants in natural stone
From the chain
0.4mm brass wire

Installation guide :

For oval buckles :

Start by gluing the 4mm cabochons into the brackets.

Then connect the pendants to the oval BOs using 3mm rings.

For Ethnic Buckles :

Start by gluing the 7mm cabochons into the earring holders.

Then open the ring under the earring to connect the pendants.

For the Boucles créoles :

Simply open the creole and slip on the natural stone pendant.

For dangling chain buckles:

Start by cutting 2 pieces of chain about 3cm long. Widen the links with a reamer to make assembly easier.

Then connect the chain to the stud earrings by opening the ring on the underside of the earring.

Then cut a piece of brass wire and thread it through the last link in the chain, keeping a piece of wire about 5cm long.

Make a mini loop then wind the thread around the bottom of the loop for 2 turns. Trim the excess thread.

With the remaining thread, thread the pendant then wind the thread 2 turns below the loop. The thread will cover the first thread used to connect the chain.

Trim the excess thread flush.

And voilà! Beautiful creation!