A tangled circle pendant
 3 cabochon stones 4mm (Labradorite, Mother-of-pearl, Amethyst)
 Glue
 3mm rings
 From the chain
 A lobster clasp
 The extension chain

To begin with, place the stones in the desired locations. Make sure you place them in areas that are wide enough to ensure a good fit under the stones.

Once you've selected the areas, apply a small dab of glue and then gently apply the cabochon. Do the same for the other stones and wait for them to dry completely.

Then cut a piece of chain about 50cm long. This is the ideal size for this type of pendant, as it will fall just above the chest. Of course, adapt this measurement to your body shape.

Place a 3mm ring on the top of the pendant (ring size for a thin chain, otherwise use a larger ring) then thread the chain through the ring.

At the ends of the chain, place a lobster clasp with a 3mm ring on one side. On the other, place a piece of extension chain with a 3mm ring. If the chain is very thin, you can widen the links with a reamer.

And voilà! Beautiful creation!

Find all the supplies below: