6mm beads
 6mm natural stone pendants
 Creoles
 Flexible 0.4mm brass wire

To begin, cut a brass wire about 15cm long.

Then string 5 6mm beads, the pendant and 5 6mm beads.

Pass the 2 ends of the thread through the hole in the creole.

Form the beads loop by pulling firmly on the threads.

Then wrap the threads around the edges of the beads for 2/3 turns.

If necessary, use flat-nose pliers.

To finish, cut off the excess thread and make the second loop.

And voilà! Beautiful creation!