| Timeless Elegance: Create Your Own Natural Stone Necklace Fall for our new creation, enhanced by natural stone beads, golden beads and a graphic pendant, as refined as it is contemporary. Perfect for brightening up end-of-year evenings or for adding an elegant touch to your everyday life, this jewel will also make a priceless gift for someone special. Follow our step by step guide below and feel free to decline thiscreation with the stones of your choice. Beautiful creation!
| ||||
|---|---|---|---|---|
| For this achievement you need: | ||||
|
| ||||
| The assembly: | ||||
| | To start, unroll the silk thread from its cardboard then tie a knot on one of the rings of the pendant at the end of the thread. Be sure to tie a tight knot. Do not cut the thread at the edge of the knot, we will pass it through the first beads. Then thread an 8mm bead. Also insert the small end of the wire.
Continue threading the beads, alternating with metal round beads. Tip: Do not undo the 2mm beading thread! Remove the beads little by little by 4/5 while holding them firmly between 2 fingers. This will make it easier to thread the needle into the holes of the beads. They will be well aligned in the same axis between your fingers.
Continue threading the small 2mm faceted beads until the correct length. Here we wanted to make a 40cm choker necklace. We therefore took the measurement starting from the center of the pendant until a total threading of 20cm.
Now we will make the knot for the clasp. This step is quite delicate because we must not tighten the threading too much so that it remains flexible, taking care not to leave too much space. For this we have a tip! How to tie a well-positioned knot on a pearl necklace? Make a first simple knot on the clasp then pull on the thread to bring the clasp to the edge of the pearls. Insert a needle into the thread, between the clasp and the beads, then make the 2nd knot. Tighten the knot well, then remove the needle. Tighten the knot again.
Then repeat all the previous steps in symmetry for the other side of the necklace. At the end of the threading you will place a 5cm piece of extension chain. Before cutting off any excess threads, place a small amount of glue on all the knots. This will help secure the knots. Once the glue is completely dry, you can now cut the threads at the edge knots.
And there you have it! Beautiful creation!
| |||
Rejoignez Perles Corner pour découvrir nos nouveautés, Tutoriels exclusifs et bien d'autres surprises... et recevez votre bon par email !
a thread of 2mm faceted natural stone beads
