Livraison offerte en point relais à partir de 59€
Découvrez nos nombreuses créations à réaliser vous-même...
Nos produits sélectionnés et fabriqués avec le plus grand soin
Découvrez la collection !
Les Perles divers
Perles de Bohème
Ajoutez de la couleur à vos créations !
Les fils pour bijoux
Wellness & Good Vibes !
Pour sublimer vos créations !
With this Choker Necklace tutorial, learn a new macramé weaving technique that is very simple to achieve for a joyful and colorful result! Start by choosing the cord colors, play with the different pendants, shades, shapes, then get started to easily create a piece of jewelry that will accompany you all summer! A very easy tutorial that will suit creators beginners and confirmed. Beautiful creation! |
---|
For this achievement you need: | ||||
Linhasita 0.5mm cords (8 colors) |
Tools to use: | ||||
pliers for jewelry creations | ||||
The assembly: | ||||
This creation is very easy to make, for this we will make a colored cord by mixing different threads. You will see it is a very simple weaving technique that will allow you to change color very easily and thus create a unique and totally personalized cord. Here we are going to make a 4mm diameter cord, for this take 8 cords of 0.5mm diameter. Play with the contrasts or create a beautiful gradient of solid colors. To start, cut 8 pieces of wire, each about 1.5 meters long, then tie a simple knot with all the cords at the end. This will lock the wires together, this knot will be hidden in the end cap at the end. Now start weaving. Take a colored wire (here the blue wire is used as an example) then pass it under the other wires. Then pass the blue wire over the others and pass it through the loop created. The blue wire thus traps the 7 other wires. Still using this method, continue the knots in the same direction. You will thus obtain a spiral of knots. When you want to change the color of the thread, bring the previous thread to the center with the other threads then take the colored thread outwards. Always repeat the knots in the same direction. It's very easy! Be careful to tighten the knots well, especially when changing color! Continue the assembly until the desired length. For a choker necklace, we made a 38cm cord, then the clasp and the extension chain will be added to adjust the necklace. Tie a simple knot with all the threads at the edge of the last knot. Thread the closed rings onto the cord and then position the different pendants with the 5mm rings. This size of rings allows you to place the pendants in the desired locations without them moving too much or remaining fixed on the cord. Finally, cut the cords flush with the knots at the ends. Place glue in the tips, being careful not to put too much, then thread the ends of the cord. Wait until the glue is dry before handling the cord. NOW with 4mm rings place the clasp and the extension chain at the ends. Your jewel is finished! Beautiful creation! You can also adjust the length of the cord to be able to wear it as a multi-wrap bracelet! |